2,552
edits
Changes
no edit summary
== How do I stop the fan from coming on during printing? ==
Set both the [[Disable SETTINGS/Filament/Cooling /FanSpeed/Minimum Fan Speed|Minimum Fan Speed]] and [[SETTINGS/Filament/Cooling/Fan Speed/Maximum Fan Speed|Maximum Fan Speed]]to 0.
== What does support material do? ==
When you check the "generate support material" [[SETTINGS/General/Support_Material/Support_Material/Generate_Support_Material|Generate Support Material]] box, your print will contain support material. This is used to provide support in areas of a design that are otherwise suspended in the air, such as a bridge or a ledge. The properties will change depending on which [[:Category:Slice Engines|slice engine]] you use.
== What is the the optimal temperature for printing? ==
| PLA || || 190-210°C
|-
| ABS || || 220 -240°C
|-
| PET || || 240-250°C|-| NYLON || || 240C240-250°C
|-
| LAYWOOD || || 175-250°C
|}
Using these guidelines, you can find a temperature that works for your particular filament. You can also use these to configure your [[Controls/Temperature#Temperature Shortcut Presets|temperature presets]].
== What is the optimal temperature for the heated bed? ==
| PLA || || 70-80°C
|-
| ABS/NYLON || || 100 -120°C
|-
| SOFT PLA/BENDLAY/TPE || || 65-85°C
|}
Using these guidelines, you can find a temperature that works for your particular filament. You can also use these to configure your [[Controls/Temperature#Temperature Shortcut Presets|temperature presets]].
[[Category:Slice Settings]]
[[Category:Troubleshooting]]