2,552
edits
Changes
Created page with "{{Slice Settings| The minimum angle of overhang for which support material will be created. The angle perpendicular to the bed {{=}} 0; parallel with the bed {{=}} 90.|*degre..."
{{Slice Settings|
The minimum angle of overhang for which support material will be created. The angle perpendicular to the bed {{=}} 0; parallel with the bed {{=}} 90.|*degrees
Can be zero.
=== Presets ===
*Minimum : 20
*Standard : 45
*All : 90
*Custom : user-defined|
=== Parameter 1 ===
The standard preset will generate support material for any overhang which is more than 45 degrees from perpendicular with the bed.}}
The minimum angle of overhang for which support material will be created. The angle perpendicular to the bed {{=}} 0; parallel with the bed {{=}} 90.|*degrees
Can be zero.
=== Presets ===
*Minimum : 20
*Standard : 45
*All : 90
*Custom : user-defined|
=== Parameter 1 ===
The standard preset will generate support material for any overhang which is more than 45 degrees from perpendicular with the bed.}}