2,552
edits
Changes
Created page with "{{Slice Settings |The angle at which the support material lines will be drawn.|*degrees Can be zero.| For this example, [http://104.154.32.252/images/7/72/Support_test.stl..."
{{Slice Settings
|The angle at which the support material lines will be drawn.|*degrees
Can be zero.|
For this example, [http://104.154.32.252/images/7/72/Support_test.stl Support_test.stl] is the model used.
=== degrees ===
In this example, the infill angle is 60 degrees as shown on the first layer of the model in [[2D Layer View]].}}
|The angle at which the support material lines will be drawn.|*degrees
Can be zero.|
For this example, [http://104.154.32.252/images/7/72/Support_test.stl Support_test.stl] is the model used.
=== degrees ===
In this example, the infill angle is 60 degrees as shown on the first layer of the model in [[2D Layer View]].}}