2,552
edits
Changes
Created page with "{{Slice Settings |Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion. <nowiki>*</nowiki>Experimental feature.|*..."
{{Slice Settings
|Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion.
<nowiki>*</nowiki>Experimental feature.|*millimeters (mm)|
=== mm ===
For this example, [http://104.154.32.252/images/0/0d/Calibration_-_Box.stl Calibration - Box.stl] is the model used.
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter.}}
|Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion.
<nowiki>*</nowiki>Experimental feature.|*millimeters (mm)|
=== mm ===
For this example, [http://104.154.32.252/images/0/0d/Calibration_-_Box.stl Calibration - Box.stl] is the model used.
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter.}}