Changes

|A modifier of the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] for the first layer of the print.  A value greater than 100% can help with adhesion to the print bed.|*millimeters (mm)

In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle size diameter set under Printer settings]] will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.