2,552
edits
Changes
Created page with "{{Slice Settings |The position (X and Y coordinates) of the center of the print bed, in millimeters. For printers with a rectangular bed, these two values are usually positi..."
{{Slice Settings
|The position (X and Y coordinates) of the center of the print bed, in millimeters.
For printers with a rectangular bed, these two values are usually positive as the origin is at the bottom left corner of the bed. For printers with a circular bed, the origin is in the middle of the circle.|*millimeters (mm)|
=== mm ===
In this example, the center of the print bed is 100 millimeters from the left side of the bed along the X axis and 75 millimeters from the bottom of the bed along the Y axis.}}
|The position (X and Y coordinates) of the center of the print bed, in millimeters.
For printers with a rectangular bed, these two values are usually positive as the origin is at the bottom left corner of the bed. For printers with a circular bed, the origin is in the middle of the circle.|*millimeters (mm)|
=== mm ===
In this example, the center of the print bed is 100 millimeters from the left side of the bed along the X axis and 75 millimeters from the bottom of the bed along the Y axis.}}