Changes

SETTINGS/Printer/Print Leveling/Probe Settings/Z Offset

226 bytes added, 19:31, 13 January 2016
Created page with "{{Slice Settings |The thickness of the paper (or other calibration device) used to perform manual bed probe.|*millimeters (mm)| === mm === In this example, the paper to be..."
{{Slice Settings

|The thickness of the paper (or other calibration device) used to perform manual bed probe.|*millimeters (mm)|

=== mm ===

In this example, the paper to be used during the manual bed probe is 0.1 mm thick.}}