Changes

CONTROLS/Temperature

2,031 bytes added, 18:36, 14 January 2016
no edit summary
__NOTOC__{{DISPLAYTITLE:Temperature}}[[File:TempcontrolTemperature-ss.png|right|framed|<center>The 'Temperature' section of the Controls pane.</center>]]
The printer's bed and extruder and heated bed (if present) can be heated manually by typing in entering a value in the entry boxrelated field. There are also presets  Presets for the extruder and bed temperaturesare available. For <br clear=all>== Extruder Temperature == Controls the extruder temperature, of the PLA and ABS presets nozzle. If multiple extruders are 190ºC present and 220ºC respectively[[Slice Settings/Printer/Features/Hardware/Extruder Count|specified]], a section appears for each one. For the bed  === Actual === The actual temperatureof the nozzle, in degrees Celsius. === Target === The intended temperature of the PLA and ABS presets are 70ºC and 130ºC respectivelynozzle, in degrees Celsius. The Target and Actual temperatures printer will attempt to reach this value automatically when the difference of the Actual and Target Temperatures is more than 0.5°C, whether it is higher or lower. To set a value: click the box, enter a value, then click the 'SET' button or hit enter. === OFF === Turn the extruder are displayed heater off. === PREHEAT === Sets the Target temperature to the left current [[Slice Settings/Filament/Filament/Extruder Temperatures/Extruder Temperature|Extruder Temperature]] as set in Slice Settings. == Bed Temperature == Controls the temperature of the boxheated bed.  === Actual === The current temperatures actual temperature of the bed and extruder , in degrees Celsius. === Target === The intended temperature of the bed, in degrees Celsius. The printer will attempt to reach this value automatically, whether it is higher or lower than the Actual temperature. To set a value: click the box, enter a value, then click the 'SET' button or hit enter. === OFF === Turn the bed heater off. === PREHEAT === Sets the Target temperature to the current [[Slice Settings/Filament/Filament/Bed Temperatures/Bed Temperature|Bed Temperature]] as set in Slice Settings. == Temperature Shortcut Presets == [[File:Temperature Shortcut Presets-ss.png|right]]Temperature Shortcut Presets are displayed with two white icons at available for both the topExtruder Temperature(s) and the Bed Temperature. Click the pencil icon ([[File:Pencil-edit.png]]) to the right corner of the interfacename to open the respective window. Up to three presets can be saved. They will be listed in order of temperature, from lowest to highest. [[File:Temperature Presets-Edit.png|framed|none|<center>Click the pencil icon to open the presets window.</center>]] === Label === Give the preset a unique name. === Temp (C) === The temperature to which the preset will cause the extruder or bed to heat. === Max Temp. === Something [[File:Temperature-Presets-ss.png|none|framed|<center>The 'ABS' example preset in use.</center>]]
[[Category:Features]]
[[Category:Incomplete]]
[[Category:Controls]]