Open main menu

Changes

SETTINGS/General/Support Material/Support Options/Air Gap

153 bytes added, 20:38, 8 March 2016
no edit summary
{{Slice Settings1Settings
|The distance to skip between the support (including [[Settings/General/Support Material/Support Options/Interface Layers|interface layers]]) and the model. For PLA and ABS a value between 0.1 and 0.3 generally works well.
In this example, the distance between the top of the support material and the bottom of the model is 0.2 mm.}}
 
=== layers ===
 
In this example, the distance between the top of the support material and the bottom of the model is 3 layers
 
[[File:Z Gap-ss-ex1.png]]