234
edits
Changes
no edit summary
|The position (X and Y coordinates) of the center of the print bed, in millimeters.
Cartesian printers: For printers with a rectangular bed, these two values are usually positive as the origin is at the bottom left corner of the bed. The print center should be 1/2 the [[Settings/Printer/Print_Area/Size_and_Coordinates/Bed_Size|Bed Size]]. Delta printers: For printers with a circular bed, the origin is in the middle of the circle. The print center should be 0, 0.|*millimeters (mm)|
=== mm ===
In this example, the center of the print bed is 100 millimeters from the left side of the bed along the X axis and 75 millimeters from the bottom of the bed along the Y axis.}}