Changes

SETTINGS/General/Speed/Modifiers/First Layer Speed

541 bytes added, 23:09, 21 December 2015
Created page with "{{Slice Settings |The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.|*millimeters per second (m..."
{{Slice Settings

|The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.|*millimeters per second (mm/s)
*percentage [of [[Slice Settings/General/Speed/Speed for Infill/Infill|Infill]]] (%)|

=== mm/s ===

In this example, the first layer will print at 20 mm/s.}}

=== % ===

In this example, the first layer will print at 35% percent of the Infill speed (which for this example is set at 40), so the final speed will be 14 mm/s.

[[File:{{SUBPAGENAME}}-ss-ex1.png]]