Extruder Temperature
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Extruder Temperatures
Revision as of 16:22, 23 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The target temperature the extruder will attempt to reach during the print. This temperature can be adjusted during a print by changing the value in the [...")
Function
The target temperature the extruder will attempt to reach during the print.
This temperature can be adjusted during a print by changing the value in the Extruder Temperature Target field.
Parameters
- degrees Celsius
Example(s)
degrees
In this example, the extruder will attempt to reach 218 for the duration of the print.
