Wipe After Retract

From MatterControl Manual

< SETTINGS‎ | Filament‎ | Retraction‎ | While Printing

Revision as of 12:54, 20 January 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Slice Settings/Filament/Filament/Retraction/Wipe After Retract to Settings/Filament/Filament/Retraction/Wipe After Retract)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

A screenshot of the Wipe After Retract setting as seen in MatterControl's SETTINGS pane.

Function

The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.

Parameters

Boolean

Example(s)

Boolean

The check box is checked to use the function.

Wipe After Retract-ss-ex.png

The check box is unchecked to leave the function unused.

Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Filament/Retraction/While_Printing/Wipe_After_Retract&oldid=1761"