CONTROLS/Temperature
From MatterControl Manual
< CONTROLS
Revision as of 17:49, 7 December 2015 by MatterHackers (Talk | contribs) (Created page with "center The printer's bed and extruder can be heated manually by typing in a value in the entry box. There are also presets for the extruder and bed t...")
The printer's bed and extruder can be heated manually by typing in a value in the entry box. There are also presets for the extruder and bed temperatures. For the extruder temperature, the PLA and ABS presets are 190ºC and 220ºC respectively. For the bed temperature, the PLA and ABS presets are 70ºC and 130ºC respectively. The Target and Actual temperatures of the extruder are displayed to the left of the box. The current temperatures of the bed and extruder are displayed with two white icons at the top-right corner of the interface.
