Support Type
From MatterControl Manual
< SETTINGS | General | Support Material | Support Material
Revision as of 15:40, 20 January 2016 by MatterHackers (Talk | contribs)
Function
The pattern to draw for the generation of support material.
Parameters
Available as presets only:
- GRID
- LINES
Example(s)
For these examples, Support_test.stl is the model used.
GRID
The GRID support material type, shown here in Layer View#3D at full height before the overhang.
LINES
The LINES support material type, shown here in 3D Layer View at full height before the overhang.
