Spiral Vase
From MatterControl Manual
< SETTINGS | General | Single Print | Settings Will Clear at End of Print
Revision as of 12:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/General/Single Print/Settings Will Clear at End of Print/Spiral Vase to SETTINGS/General/Single Print/Settings Will Clear at End of Print/Spiral Vase)
Function
When selected, object will print with 0 infill, and 0 top layers and 1 perimeter. The perimeter is a single extrusion – with no starts and stops – and spirals up to the top of the print. You can still specify the desired number of solid bottom layers. As you might have guessed, this is the preferred setting for printing vases or other single-walled objects. Only one part will print at a time with this feature.
Parameters
- Boolean
Example(s)
Boolean
The check box is checked to use the function.
The check box is unchecked to leave the function unused.
