Support Type
From MatterControl Manual
< SETTINGS | General | Support Material | Support Material
Revision as of 12:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/General/Support Material/Support Material/Support Type to SETTINGS/General/Support Material/Support Material/Support Type)
Function
The pattern to draw for the generation of support material.
Parameters
Available as presets only:
- GRID
- LINES
Example(s)
For these examples, Support_test.stl is the model used.
GRID
The GRID support material type, shown here in 3D Layer View at full height before the overhang.
LINES
The LINES support material type, shown here in 3D Layer View at full height before the overhang.
