Recover Layer Speed

From MatterControl Manual
Jump to: navigation, search
A screenshot of the Recover Layer Speed setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the nozzle will move when recovering a failed print, for one layer.

Parameters

  • millimeters per second (mm/s)

Example(s)

mm/s

In this example the nozzle will move at 10 mm/s whilst printing the layer the printer was on when it failed.

Recover Layer Speed-ss-ex.png
Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Printer/Print_Recovery/Recover_Settings/Recover_Layer_Speed&oldid=3648"