Leveling Solution

A screenshot of the Leveling Solution setting as seen in MatterControl's SETTINGS pane.

Function

The print leveling algorithm to use when the Software Print Leveling wizard runs.

Note: This section (Print Recovery) is not shown when Has Hardware Leveling is enabled as only one form of leveling can be used at a time.

Parameters

Available as presets only:

• 3-Point Plane
• 7-Point Disk
• 13-Point Disk

Example(s)

3-Point Plane

In this example, the printer will use the 3-Point Plane algorithm during the Software Print Leveling wizard.

7-Point Disk

In this example, the printer will use the 7-Point Disk algorithm during the Software Print Leveling wizard.

13-Point Disk

In this example, the printer will use the 13-Point Disk algorithm during the Software Print Leveling wizard.