Lower-Deploy

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Print Leveling‎ | Probe Settings
Revision as of 09:27, 2 August 2017 by Tanderson (Talk | contribs) (Created page with "{{Slice Settings |This is the angle that lowers or deploys the Z probe.|*Degrees| }}")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Lower-Deploy setting as seen in MatterControl's SETTINGS pane.

Function

This is the angle that lowers or deploys the Z probe.

Parameters

  • Degrees

Example(s)

Lower-Deploy-ss-ex.png
Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Printer/Print_Leveling/Probe_Settings/Lower-Deploy&oldid=4070"