Top Solid Infill
< SETTINGS | General | Speed | Speed for InfillRevision as of 17:35, 18 December 2015 by MatterHackers (Talk | contribs)
Revision as of 17:35, 18 December 2015 by MatterHackers (Talk | contribs)
Contents
Function
The speed at which the top solid layers will be printed.
Parameters
Millimeters per second or percentage [of Infill speed]
Example(s)
mm/s
In this example, the top solid infill will print at 30 mm/s.
%
In this example, the top solid infill will print at 50% of the Infill speed (which if you can make out the blurred text is set at 40), so the final result will be 20 mm/s.
