Raft

A screenshot of the Raft setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the layers of the raft (other than the first layer) will be printed.

Parameters

Millimeters per second or percentage [of Infill speed]

Example(s)

mm/s

In this example, the raft infill will print at 35 mm/s.

%

In this example, the raft infill will print at 75% of the Infill speed (which if you can make out the blurred text is set at 40), so the final result will be 30 mm/s.