Fill Density
< SETTINGS | General | Infill | InfillRevision as of 17:19, 18 December 2015 by MatterHackers (Talk | contribs)
Revision as of 17:19, 18 December 2015 by MatterHackers (Talk | contribs)
Function
The ratio of material to empty space ranged 0 to 1. Zero would be no infill; 1 is solid infill.
Parameters
- percentage (%)
- ratio
Can be zero.
Presets
- Light: 10%
- Standard: 30%
- Heavy: 90%
- Custom: user-defined (can be % or ratio). Can be zero.
Example(s)
%
Using a percentage. In this case, the infill will be 37% of the total area designated for infill.
Ratio
Using a ratio from 0 to 1. In this case, 0.89 translates to 89%. Actual infill will be 89% of the total area designated for infill.
