Open main menu

Layer Height

< SETTINGS‎ | General‎ | Layers-Surface‎ | Layer Height
Revision as of 17:20, 18 December 2015 by MatterHackers (Talk | contribs)

Revision as of 17:20, 18 December 2015 by MatterHackers (Talk | contribs)

A screenshot of the Layer Height setting as seen in MatterControl's SETTINGS pane.

Function

Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.

Parameters

  • millimeters

Example(s)

mm

Shown here in 3D Layer View, this 10mm high box has a layer height of 0.2mm.


Layer Height-ss-ex.png
Last modified on 5 September 2018, at 09:41