Raft

A screenshot of the Raft setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the layers of the raft (other than the first layer) will print.

Parameters

• millimeters per second (mm/s)
• percentage [of Infill speed] (%)

Example(s)

mm/s

In this example, the raft infill will print at 35 mm/s.

%

In this example, the raft infill will print at 75% of the Infill speed (which if you can make out the blurred text is set at 40), so the final result will be 30 mm/s.