Bridges
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Other Printing
Revision as of 13:46, 21 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The speed at which bridging between walls will print.|*millimeters per second (mm/s)| === mm/s === In this example, the bridge will print at 60 mm/s.}}")
Function
The speed at which bridging between walls will print.
Parameters
- millimeters per second (mm/s)
Example(s)
mm/s
In this example, the bridge will print at 60 mm/s.
