Outside Perimeter

A screenshot of the Outside Perimeter setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which outside, external, or the otherwise visible perimeters will print.

Parameters

• millimeters per second (mm/s)
• percent [of inside perimeters] (%).

Example(s)

mm/s

In this example, the outside perimeters will print at 25 mm/s.

%

In this example, the outside perimeters will print at 60% of the Inside Perimeters speed (which if you can make out the blurred text is set at 40), so the final result will be 24 mm/s.