Support Type
From MatterControl Manual
< SETTINGS | General | Support Material | Support Material
Revision as of 10:55, 22 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The pattern to be drawn for the generation of support material.|Available as presets only: *GRID *LINES| For these examples, [http://104.154.32.252/images...")
Function
The pattern to be drawn for the generation of support material.
Parameters
Available as presets only:
- GRID
- LINES
Example(s)
For these examples, Support_test.stl is the model used.
GRID
The GRID support material type, shown here at full height before the overhang.
LINES
The LINES support material type, shown here at full height before the overhang.
