Infill Angle

From MatterControl Manual
< SETTINGS‎ | General‎ | Support Material‎ | Support Options
Revision as of 13:31, 22 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The angle at which the support material lines will be drawn.|*degrees Can be zero.| For this example, [http://104.154.32.252/images/7/72/Support_test.stl...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Infill Angle setting as seen in MatterControl's SETTINGS pane.

Function

The angle at which the support material lines will be drawn.

Parameters

  • degrees

Can be zero.

Example(s)

For this example, Support_test.stl is the model used.

degrees

In this example, the infill angle is 60 degrees as shown on the first layer of the model in 2D Layer View.

Infill Angle-ss-ex.png