2,552
edits
Changes
Created page with "{{Slice Settings |The temperature to which the bed will heat (or cool) in order to remove the part. Used only by Custom G-Code fields as a Custom GCode Variables|Custom GC..."
{{Slice Settings
|The temperature to which the bed will heat (or cool) in order to remove the part.
Used only by Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*degrees Celsius
== [[Custom GCode Variables|Custom GCode Variable]] ==
<code>bed_remove_part_temperature</code>|
=== degrees ===
In this example, the bed will cool to 55 degrees after the print as specified in the [[Slice Settings/Printer/Custom G-Code/End G-Code|End GCode]] field, assuming the variable is used.}}
|The temperature to which the bed will heat (or cool) in order to remove the part.
Used only by Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*degrees Celsius
== [[Custom GCode Variables|Custom GCode Variable]] ==
<code>bed_remove_part_temperature</code>|
=== degrees ===
In this example, the bed will cool to 55 degrees after the print as specified in the [[Slice Settings/Printer/Custom G-Code/End G-Code|End GCode]] field, assuming the variable is used.}}
