2,552
edits
Changes
Created page with "{{Slice Settings |A modifier of the width of the extrusion for the first layer of the print. A value greater th..."
{{Slice Settings
|A modifier of the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.|*millimeters (mm)
*percent (%)
Set to 0 to use [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|
=== mm ===
In this example, the adjusted nozzle diameter for the first layer extrusion will be .5 mm.}}
=== % ===
In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle size set under Printer settings]] will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]
|A modifier of the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] for the first layer of the print. A value greater than 100% can help with adhesion to the print bed.|*millimeters (mm)
*percent (%)
Set to 0 to use [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|
=== mm ===
In this example, the adjusted nozzle diameter for the first layer extrusion will be .5 mm.}}
=== % ===
In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle size set under Printer settings]] will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]
