2,552
edits
Changes
Created page with "A basic cube using [http://wiki.mattercontrol.com/CuraEngine Cura]'s infill pattern at 10%. '''Infill''' is the material used to fill the spa..."
[[File:Infill.jpg|center|frame|A basic cube using [http://wiki.mattercontrol.com/CuraEngine Cura]'s infill pattern at 10%.]]
'''Infill''' is the material used to fill the space between the horizontal layers of a print. It can be assigned a percentage value from 0 to 100%, which changes the density of the material. It is used to increase structural integrity, and can also serve to add weight to a part. Depending on your [[Slice Engine]], the infill pattern can be changed to suit your needs.
[[Category:Slice Settings]]
'''Infill''' is the material used to fill the space between the horizontal layers of a print. It can be assigned a percentage value from 0 to 100%, which changes the density of the material. It is used to increase structural integrity, and can also serve to add weight to a part. Depending on your [[Slice Engine]], the infill pattern can be changed to suit your needs.
[[Category:Slice Settings]]
![A basic cube using [http://wiki.mattercontrol.com/CuraEngine Cura]'s infill pattern at 10%.](/File:Infill.jpg){kind=link}