2,552
edits
Changes
no edit summary
{{Slice Settings1
|The vertical distance from the Z probe to the nozzle, in millimeters. For manual probing, this is thickness of the paper (or other calibration device) used to perform manual bed probe.
=== Restrictions ===
*Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as only one form of leveling can be used at a time.|*millimeters (mm)|
=== mm ===
In this example, the paper to be used during the manual bed Z probe is 0.1 mm thick.6mm higher than the nozzle.}}
