Changes

Jump to: navigation, search

SETTINGS/General/Speed/Speed for Infill/Top Solid Infill

367 bytes added, 23:55, 18 December 2015
no edit summary
{{Slice Settings
|Function textThe speed at which the [[Slice_Settings/General/Layers-Surface/Outer_Surface_-_Top_%26_Bottom/Top_Solid_Layers|Parameters texttop solid layers]] are printed.|Millimeters per second or percentage [of [[Slice_Settings/General/Speed/Speed_for_Infill/Infill|Infill speed]]]|
=== Parameter 1 mm/s ===
Caption for Example for Parameter 1In this example, the top solid infill will print at 30 mm/s.}}
=== Parameter 2 % ===
Caption for In this example for Parameter 2, the top solid infill will print at 50% of the Infill speed (which if you can make out the blurred text is set at 40), so the final result will be 20 mm/s.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]
Retrieved from "http://wiki.mattercontrol.com/Special:MobileDiff/772"

Navigation menu