234
edits
Changes
no edit summary
__NOTOC__{{SCO}}<br>[[File:Controls-ss.png|framed|right|<center>The '''CONTROLS''' pane as seen in MatterControl desktop with a few blurred-out custom Macro buttons.</center>]]The CONTROLS pane is where available manual controls can be used and adjustments can be made during prints. To access the Controls menu from the MatterControl main screen, click [[File:Settings Controls.png|link== Settings & Controls]] --> [[File:Controls.png|link=CONTROLS]] The pane can be [[Pop out|popped out]] into its own window. [[File:Pop out.png|link=Pop out]] == [[CONTROLS/Temperature|Temperature]] ==
Temperature Controls for the extruder(s) and heated bed (if present).
== [[ControlsCONTROLS/Movement|Movement]] ==
Manual movement controls for the nozzle and extruder(s). X, Y, and Z movement controls switch to fine adjustment during prints.
== [[ControlsCONTROLS/Fan|Fan]] ==
Manual control of [[layer-cooling fan]] speed.
== [[ControlsCONTROLS/ATX Power Control|ATX Power Control]] == If the printer's controller board supports it, and if enabled through [[SETTINGS/Printer/Features/Hardware/Has Power Control|Printer settings]], this section allows for direct control of the printer's main power. == [[CONTROLS/Macros|Macros]] ==
The Macros section is for saving snippets of G-Code as easy-to-use buttons. The image on the right has a few examples, blurred as they may be since those particular buttons are not included with MatterControl by default.
== [[ControlsCONTROLS/Tuning Adjustment|Tuning Adjustment]] ==
Allows for manual adjustment of speed and extrusion during a print.
== [[CONTROLS/Firmware Updater|Firmware Updater]] ==
Allows the user to update an Arduino-based printer's firmware from within MatterControl.
[[Category:Controls]]
