Changes

{{Migrated|printer-controls/hotend-controls}}__NOTOC__{{DISPLAYTITLE:Temperature}}[[File:Temperature-ss.png|right|framed|<center>The '''Temperature''' section of the Controls pane.</center>]]

The printer's extruder and heated bed (if present) can be heated manually by either entering a value in the related field, or from the respective value in the slice settings.

Presets can be set for the extruder and bed temperatures are available.

Controls the temperature of the nozzle. If multiple extruders are present and [[Slice Settings/Printer/Features/Hardware/Extruder Count|specified]], a section appears for each one.

Sets the Target temperature to the current [[Slice Settings/Filament/Filament/Extruder Temperatures/Extruder Temperature|Extruder Temperature]] as set in Slice Settings.

The intended temperature of the bed, in degrees Celsius. The printer will attempt to reach this value automaticallywhen the difference of the Actual and Target Temperatures is more than 0.5°C, whether it is higher or lower than the Actual temperature.

Sets the Target temperature to the current [[Slice Settings/Filament/Filament/Bed Temperatures/Bed Temperature|Bed Temperature]] as set in Slice Settings.

[[File:Temperature Shortcut Presets-ssEdit.png|framed|right|<center>Click the pencil icon to open the presets window.</center>]]Temperature Shortcut Presets are available for both the Extruder Temperature(s) and the Bed Temperature. Click the pencil icon ([[File:Pencil-edit.png]]) to the right of the name to open the respective window.

[[File:Temperature Shortcut Presets-Editss.png|framed|none|<center>Click the pencil icon to open the presets window.</center>]] 

[[File:Temperature-Presets-ss.png|nonecenter|framed|<center>The 'ABS' example preset presets in use.</center>]]