Difference between revisions of "CuraEngine"

From MatterControl Manual
Jump to: navigation, search
(Created page with "'''CuraEngine''' is one of the slicing engines that is integrated into MatterControl. The complete list of settings can be found on the Slice Settings page. Category:...")
 
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
'''CuraEngine''' is one of the slicing engines that is integrated into MatterControl.  
+
__NOTOC__'''CuraEngine''' is a third-party slicing engine which has been integrated into MatterControl.
  
The complete list of settings can be found on the [[Slice Settings]] page.
+
== Origin ==
  
[[Category:Features]]
+
CuraEngine is written in C++. It was officially released with Cura in June 2013.<ref>[http://reprap.org/wiki/Cura Cura - RepRapWiki]</ref>
 +
 
 +
== Documentation ==
 +
 
 +
The complete list of settings can be found on the [[CuraEngine Settings]] page.
 +
 
 +
== Repository ==
 +
 
 +
CuraEngine is an open source project hosted on GitHub: https://github.com/Ultimaker/CuraEngine
 +
 
 +
== References ==
 +
 
 +
<references />
 +
 
 +
[[Category:Slice Engines]]

Latest revision as of 17:19, 11 February 2016

CuraEngine is a third-party slicing engine which has been integrated into MatterControl.

Origin

CuraEngine is written in C++. It was officially released with Cura in June 2013.[1]

Documentation

The complete list of settings can be found on the CuraEngine Settings page.

Repository

CuraEngine is an open source project hosted on GitHub: https://github.com/Ultimaker/CuraEngine

References

  1. Cura - RepRapWiki