CuraEngine

From MatterControl Manual
Revision as of 17:19, 11 February 2016 by MatterHackers (Talk | contribs)

Jump to: navigation, search

CuraEngine is a third-party slicing engine which has been integrated into MatterControl.

Origin

CuraEngine was written in C++ and officially released with Cura in June 2013.[1]

Documentation

The complete list of settings can be found on the CuraEngine Settings page.

Repository

CuraEngine is an open source project hosted on GitHub: https://github.com/Ultimaker/CuraEngine

References

  1. Cura - RepRapWiki