Changes

Getting Started

44 bytes removed, 17:19, 9 December 2015
Show All Settings / User Level (Basic, Intermediate, Advanced)
[[File:Getting started9.png|center]]
When you first enter From the 'Settings' screen, you will notice a drop down box that will allow you to select allows for selection of the printer user level. These levels are Basic, Intermediate and Advanced.
*Simple is where you can make Basic mode allows for minor adjustments to your the print, like layer height, fill density, and chose to use support material and rafts. It is useful for beginners.*Intermediate is where you can customize layer mode offers a few more options for the customization of layers and perimeters, infill, skirts and brims, and support material with more detail than you would in Simple settings. You can even adjust At this level Filament and Printer specificationscan also be adjusted.*Advanced allows you to mode gives control over every aspect of your the print, including all the above features, plus Repairs, Output Options, Multiple Extruders, and other advanced content.
[[File:Getting started10.png|center]]
For clarification on any of the extra settings, you can also select 'Show Help', which will have a short description under every one. For further clarification, you can check out these slice settings articles:
:[https://www.matterhackers.com/articles/slice-settings-explained-part-1 SLICE SETTINGS EXPLAINED - PART 1]
:[https://www.matterhackers.com/articles/slice-settings-explained-part-2 SLICE SETTINGS EXPLAINED - PART 2]