Difference between revisions of "History"

From MatterControl Manual
Jump to: navigation, search
m (MatterHackers moved page HISTORY to History over redirect)
Line 1: Line 1:
__NOTOC__[[File:History.png|right|framed|<center>The History pane, with real examples of prints on a Rostock MAX V2.</center>]]The '''History''' pane displays a log of print sessions the printer has attempted and completed.
+
__NOTOC__{{DISPLAYTITLE:HISTORY}}[[File:History.png|right|framed|<center>The History pane, with real examples of prints on a Rostock MAX V2.</center>]]The '''History''' pane displays a log of print sessions the printer has attempted and completed.
  
 
== Completed Prints ==
 
== Completed Prints ==

Revision as of 11:53, 1 December 2016

The History pane, with real examples of prints on a Rostock MAX V2.
The History pane displays a log of print sessions the printer has attempted and completed.

Completed Prints

The number of prints completed by MatterControl since the program was installed, the print history was cleared, or the database was cleared.

Total Print Time

The amount of time the printer has been actively printing since the program was installed, the print history was cleared, or the database was cleared.

Only Show Completed

Toggles the display of only completed print sessions. Cancelled or otherwise failed sessions are not shown.

Show Timestamp

Toggles the display of start and end times in the log.

Clear Print History

To clear the log, navigate to the Options menu and use the CPH2.png button in the Clear Print History section.

See also: Clear Print History

Menu item options

View

The 'View' and 'Print' buttons for repeating past prints.
Clicking the View button next to a past print will open the generated G-Code file in a new 3D View window.

Print

Clicking the Print button next to a past print will send the G-Code to the printer and start the print.