Changes

OPTIONS/Software Print Leveling

107 bytes added, 20:07, 3 February 2017
no edit summary
{{DISPLAYTITLE:Software Print Leveling}}[[File:SPL7.png|right|framed|<center>The Software Print Leveling section as shown in the '''Options''' menu.</center>]]The Software Print Leveling feature of MatterControl compensates for an uneven bed. It is a form of [[Automatic Print Leveling]]. Measurement is taken of the bed as it is, then G-Code is adjusted as the print happens. The G-Code itself is not changed, but rather a filter is applied, making adjustments on-the-fly. For this reason, existing .gcode files can be printed using MatterControl with Software Print Leveling applied.
 
Related settings can be found in [[SETTINGS/Printer/Print_Leveling|Settings > Printer > Print Leveling]].
<br clear=all>
== Enable/Disable ==