Difference between revisions of "SETTINGS/Filament/Extrusion/Extrusion Width/First Layer"

From MatterControl Manual
Jump to: navigation, search
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
{{Migrated|slice-settings/filament/advanced#first-layer}}
 
{{Slice Settings
 
{{Slice Settings
  
|A modifier of the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] for the first layer of the print.  
+
|A modifier of the [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|width of the extrusion]] for the first layer of the print.  
  
 
A value greater than 100% can help with adhesion to the print bed.|*millimeters (mm)  
 
A value greater than 100% can help with adhesion to the print bed.|*millimeters (mm)  
 
*percent (%)
 
*percent (%)
  
Set to 0 to use [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|
+
Set to 0 to use [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|default extrusion width]].|
  
 
=== mm ===
 
=== mm ===
Line 14: Line 15:
 
=== % ===
 
=== % ===
  
In this example, the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle diameter set under Printer settings]] will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.
+
In this example, the [[Settings/Printer/Extruder/Extruder X/Nozzle Diameter|nozzle diameter set under Printer settings]] will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.
  
 
[[File:{{SUBPAGENAME}}-ss-ex1.png]]
 
[[File:{{SUBPAGENAME}}-ss-ex1.png]]

Latest revision as of 18:20, 5 April 2019

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/filament/advanced#first-layer.

A screenshot of the First Layer setting as seen in MatterControl's SETTINGS pane.

Function

A modifier of the width of the extrusion for the first layer of the print.

A value greater than 100% can help with adhesion to the print bed.

Parameters

  • millimeters (mm)
  • percent (%)

Set to 0 to use default extrusion width.

Example(s)

mm

In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.5 mm.

First Layer-ss-ex.png

%

In this example, the nozzle diameter set under Printer settings will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.

First Layer-ss-ex1.png