Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
A modifier of the width of the extrusion for the first layer of the print.
A value greater than 100% can help with adhesion to the print bed.
- millimeters (mm)
- percent (%)
Set to 0 to use default extrusion width.
In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.5 mm.
In this example, the nozzle diameter set under Printer settings will be modified by 110%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.44 mm.