Difference between revisions of "SETTINGS/Filament/Extrusion/Extrusion Width/Outside Perimeters"
m (MatterHackers moved page Settings/Filament/Extrusion/Extrusion Width/Outside Perimeters to SETTINGS/Filament/Extrusion/Extrusion Width/Outside Perimeters)
|Line 1:||Line 1:|
Latest revision as of 17:25, 5 April 2019
Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
A modifier of the width of the extrusion when printing outside perimeters.
Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
- millimeters (mm)
- percent (%)
Set to 0 to use default extrusion width.
In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.3 mm.
In this example, the nozzle size set under Printer settings will be modified by 90%. For this example, the nozzle size was 0.5 mm, so the adjusted size will be 0.45 mm.