Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Speed"
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
(Created page with "{{Slice Settings |The speed at which filament will retract and re-extrude until the next print move.|*millimeters per second (mm/s)| === mm/s === In this example, filament...") |
|||
| (6 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | {{Migrated|slice-settings/filament/retraction#speed}} | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The speed at which filament will retract and re-extrude until the next print move.|*millimeters per second (mm/s)| | + | |The speed at which filament will retract and re-extrude until the next print move.|*millimeters per second (mm/s) |
| + | |||
| + | == [[Custom G-Code Variables|Custom G-Code Variable]] == | ||
| + | |||
| + | <code>retract_speed</code>| | ||
=== mm/s === | === mm/s === | ||
In this example, filament will retract and re-extrude at 110 mm/s until the next print move.}} | In this example, filament will retract and re-extrude at 110 mm/s until the next print move.}} | ||
Latest revision as of 11:28, 9 April 2019
|
|
Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/. |
Function
The speed at which filament will retract and re-extrude until the next print move.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
retract_speed
Example(s)
mm/s
In this example, filament will retract and re-extrude at 110 mm/s until the next print move.
