Speed

From MatterControl Manual
< SETTINGS‎ | Filament‎ | Retraction‎ | While Printing
Revision as of 15:23, 30 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The speed at which filament will retract and re-extrude until the next print move.|*millimeters per second (mm/s)| === mm/s === In this example, filament...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Speed setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which filament will retract and re-extrude until the next print move.

Parameters

  • millimeters per second (mm/s)

Example(s)

mm/s

In this example, filament will retract and re-extrude at 110 mm/s until the next print move.

Speed-ss-ex.png