From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
Revision as of 12:37, 1 December 2016 by MatterHackers (MatterHackers moved page Settings/Filament/Retraction/While Printing/Speed to SETTINGS/Filament/Retraction/While Printing/Speed)
The speed at which filament will retract and re-extrude until the next print move.
- millimeters per second (mm/s)
In this example, filament will retract and re-extrude at 110 mm/s until the next print move.