Wipe After Retract

From MatterControl Manual
< SETTINGS‎ | Filament‎ | Retraction‎ | While Printing
Revision as of 18:10, 16 May 2019 by Tanderson (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Outdated: This setting is no longer available in MatterControl 2.0.
This page contains outdated information and is kept only for historical reasons.
For up to date information on MatterControl 2.0, visit the new MatterControl documentation.

A screenshot of the Wipe After Retract setting as seen in MatterControl's SETTINGS pane.


The extruder will wipe the nozzle over the last up to 10 mm of tool path after retracting.


  • Boolean



The check box is checked to use the function.

Wipe After Retract-ss-ex.png

The check box is unchecked to leave the function unused.

Wipe After Retract-ss-ex1.png