Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Z Lift"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |The distance the nozzle will lift after each retraction.|*millimeters (mm)| === mm === In this example, the nozzle will lift 0.3 mm after every retraction.}}")
 
Line 1: Line 1:
 
{{Slice Settings
 
{{Slice Settings
  
|The distance the nozzle will lift after each retraction.|*millimeters (mm)|
+
|The distance the nozzle will lift after each retraction.|*millimeters (mm)
 +
 
 +
Can be zero.|
  
 
=== mm ===
 
=== mm ===
  
 
In this example, the nozzle will lift 0.3 mm after every retraction.}}
 
In this example, the nozzle will lift 0.3 mm after every retraction.}}

Revision as of 15:32, 30 December 2015

A screenshot of the Z Lift setting as seen in MatterControl's SETTINGS pane.

Function

The distance the nozzle will lift after each retraction.

Parameters

  • millimeters (mm)

Can be zero.

Example(s)

mm

In this example, the nozzle will lift 0.3 mm after every retraction.

Z Lift-ss-ex.png