Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Z Lift"

Revision as of 18:55, 14 November 2016

A screenshot of the Z Lift setting as seen in MatterControl's SETTINGS pane.

Function

The distance the nozzle will be lifted during non-printing moves (after each retraction happens). This ensures that the nozzle will not be dragged across the top of the object.

Parameters

• millimeters (mm)

Can be zero.

Example(s)

mm

In this example, the nozzle will lift 0.3 mm after every retraction.